Weird messages in the GSP chassis log

[cnb]

What PDC version is your system running?

Please run and post the results file info_all.log -

# echo "sel dev all;info;wait;il"|/usr/sbin/cstm > /tmp/info_all.log

[Daniel Robert]

The PDC Firmware Revision: 40.50

Attached is the requested log.

[cnb]

These are LPMC events, which could be cache or memory, but your code is very old and there a lot of fixes to address Chassis Codes, firmware diagnostics, etc...

Release Notes:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=2511787&swItem=PF-CHAW4350&prodNameId=91305&swEnvOID=7&swLang=13&taskId=135&mode=4&idx=0

I would take a closer look at the software STM version, your PDC and GSP Firmware versions, patches and update accordingly.

Make sure your EMS hardware monitors are set to monitor future LPMC events.

Start here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=91305&prodTypeId=15351&prodSeriesId=2511787&swLang=13&taskId=135&swEnvOID=7

HTH

Rgds,

[cnb]

Any update?


Rgds,

[Daniel Robert]

I haven't had a chance to look at that yet.