Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Where to download firmware upgrade for rp5400

SOLVED
Go to solution
Marshmellow
Advisor

Where to download firmware upgrade for rp5400

Does anyone know where I can find this patch PF_CPREGSPA0112 please? It is for a GSP firmware upgrade. I have searched the site already but no luck.

thanks in advance.
9 REPLIES
Robert-Jan Goossens_1
Honored Contributor

Re: Where to download firmware upgrade for rp5400

Hi,

attaching the PF_CPREGSPA0112.tar.gz file. I dont know where the firmware database has been moved to.

Best regards,
Robert-Jan
Torsten.
Acclaimed Contributor

Re: Where to download firmware upgrade for rp5400

The firmware has moved to

HP Business Support Center

Go to www.itrc.com -> firmware and drivers - 9000 servers

but it's incomplete, the revision A GSP firmware isn't there, only revision B firmware is - but you have rev A.


:-((

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Robert-Jan Goossens_1
Honored Contributor
Solution

Re: Where to download firmware upgrade for rp5400

Marshmellow
Advisor

Re: Where to download firmware upgrade for rp5400

Thanks for all your replies...

I just have a slightly different problem in that the GSP won't accept the admin login and password. In fact I don't even get a chance to type in the password.
Torsten.
Acclaimed Contributor

Re: Where to download firmware upgrade for rp5400

Do you connect serial or over LAN?

Normally, if other users are connected, you need to press CTRL and E at the same time, followed by c and f to gain write access after you are logged on. Make sure you are using the correct terminal settings.

In case of a "frozen" GSP, first check it:

# stty +queryGSP < /dev/GSPdiag1

If you get no response, reset it:

# stty +resetGSP < /dev/GSPdiag1

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Marshmellow
Advisor

Re: Where to download firmware upgrade for rp5400

Thank you all for your help. I have successfully configured the said GSP.
Julian Dittrich
Occasional Advisor

Re: Where to download firmware upgrade for rp5400

Hi,

Where can I find the update now? The link is dead :(

Thank you very much in advance,

Julian
Torsten.
Acclaimed Contributor

Re: Where to download firmware upgrade for rp5400

Isn't it attached in the first reply?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Julian Dittrich
Occasional Advisor

Re: Where to download firmware upgrade for rp5400

Thank you. I realy overlook that one :(