Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

cable pinouts

Matt_88
Occasional Contributor

cable pinouts

hi,

does anyone out there know the pinouts for a db25 male to db9 female cable part# A5176-63002 rev.A? and what might be the correct forum for accessory questions such as this? thanks, any help on this would be greatly appreciated.

matt

5 REPLIES
MANOJ SRIVASTAVA
Honored Contributor

Re: cable pinouts

Hi Matt


Here you go :



Pinout: 1-4 & 5, 2-2, 3-3, 4-6, 5-7, 6-20, 7 & 8-8, 9-22


http://search.yahoo.com/bin/search?p=db25+male+to+db9+female+pinout



Manoj Srivastava


Brian M Rawlings
Honored Contributor

Re: cable pinouts

Matt: actually, you are looking for the pinouts on an HP DB9-DB25 cable, which is NOT the same as the standard industry pinout mentioned.

The cable you asked about is a very short console cable, to connect the external "secure web console" to an R-class server. This is about 15" long, and has the same pinout as the standard 24542G 3-meter console cable that goes from the DB9 on all HP 9000 servers (D- and K-class on up), to the DB25 on the dumb terminal console (or Secure Web Console, if you prefer).

You can either order the cable you referenced from partsurfer (see below for contact info), or order a 24542G console cable (same pinout as the short cable, interchangeable except for length), from your HP rep or reseller (or partsurfer), or make your own, using the following link:

[broken link removed on <4/11/2017> by Mod]  


Thanks to Michael Francisco for his excellent post with this info.

Lastly, partsurfer is at:

http://partsurfer.hp.com/cgi-bin/spi/main, or call them at (800) 227-8164 between 5 AM and 5 PM Pacific Time, Monday thru Friday


Regards, --bmr

We must indeed all hang together, or, most assuredly, we shall all hang separately. (Benjamin Franklin)
Matt_88
Occasional Contributor

Re: cable pinouts

i got a couple answers to my question but what i forgot to mention was that i also wanted to know what each pin was for, ie. which one is cts, rts, rxd, txd, etc. the wiring diagram is useful but i would appreciate any help in finding out which pins do what. thanks.

matt

JohnWRuffo
Honored Contributor

Re: cable pinouts

Matt:
Here are some links that may help you:

http://www.repairfaq.org/REPAIR/F_Pinouts.html

or

[broken link removed on <4/11/2017> by Mod]  

Hope this helps...

Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
FranklinNewhart
Occasional Visitor

Re: cable pinouts

I am looking for the Cable Pinouts for a HP 435B Power Meter.  I have the Scematic to build my own Power Sensor but I need to know the Pinouts for the cable connection.  Or are they the same as the Pinouts for the Power Scensor.