HPE Community
HPE 9000 and HPE e3000 Servers
1753481 Members
4553 Online
108794 Solutions
New Discussion юеВ

Re: can't open cdrom after ILO firmware upgrade

 
George_Dodds
Honored Contributor

тАО06-16-2009 04:05 AM

тАО06-16-2009 04:05 AM

Re: can't open cdrom after ILO firmware upgrade

For our intanium servers the patch was PHKL_34588

Unfortunately i cant remember what the patch was for the pa_risc servers as it was years ago.
0 Kudos
Torsten.
Acclaimed Contributor

тАО06-16-2009 07:17 AM

тАО06-16-2009 07:17 AM

Re: can't open cdrom after ILO firmware upgrade

The iLO firmware and the DVD drive isn't related at all. In my machine (same model) I found a small sticker at the top of the drive, this was "pressing" the drive and prevents the open operation. After removing this sticker it worked without any problem.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Ivan Doroshuk
Advisor

тАО06-16-2009 07:35 AM

тАО06-16-2009 07:35 AM

Re: can't open cdrom after ILO firmware upgrade

we were able to open the dvdrom by pushing the button when we needed to update the ilo firmware. it's after the update that we encountered the problem. when we push the button nothing happen, no light flashing, like there was no power on it.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.