Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

could not read CELLs' status from vfp

stephen peng
Valued Contributor

could not read CELLs' status from vfp

dear all,
i could not read all CELLs' status when i run vfp at GSP>, it was all blank,and there was a PDH_BATTERY_LOW_WARNING in sl. what could cause this situation?

thanks a lot
4 REPLIES
Ron Irving
Trusted Contributor

Re: could not read CELLs' status from vfp

The chassis logs may be of some help, (type sl at the console prompt, (MP>sl)


However, there IS a battery on the cell. That's probably your problem.
Should have been an astronaut.
stephen peng
Valued Contributor

Re: could not read CELLs' status from vfp

see chassis log in attached file.
Torsten.
Acclaimed Contributor

Re: could not read CELLs' status from vfp

You have a failed fan - this should be replaced asap.
Check with "ps" from MP.

Is the system still running?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
stephen peng
Valued Contributor

Re: could not read CELLs' status from vfp

what i concern is that battery problem, the blower problem is easy to fix.

the system is still running ok.