HPE Community
HPE 9000 and HPE e3000 Servers
1752347 Members
5965 Online
108787 Solutions
New Discussion юеВ

does rp2430 system board replacement firmware upgrade needed?

 
stephen peng
Valued Contributor

тАО11-08-2010 04:28 AM

тАО11-08-2010 04:28 AM

does rp2430 system board replacement firmware upgrade needed?

guys,
I am gonna replacing a rp2430's system board, re-use the old CPUs. Do I need to upgrade system firmware? Which firmware do I need to upgrade?

regards
Stephen
0 Kudos
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО11-08-2010 10:57 AM

тАО11-08-2010 10:57 AM

Re: does rp2430 system board replacement firmware upgrade needed?

The (PDC) firmware is stored on the system board, so you need at least to check the version.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
cnb
Honored Contributor

тАО11-08-2010 04:03 PM

тАО11-08-2010 04:03 PM

Re: does rp2430 system board replacement firmware upgrade needed?

Which version do you have installed now? Also check the GSP version.

Here's a link:

http://bizsupport1.austin.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=86726&prodTypeId=15351&prodSeriesId=2511788&swLang=13&taskId=135&swEnvOID=7

Rgds,
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.