HPE 9000 and HPE e3000 Servers
1748227 Members
4424 Online
108759 Solutions
New Discussion юеВ

doubt on hp server R class 9000 in hyper terminal

 
SOLVED
Go to solution
Arockiasamy
Advisor

doubt on hp server R class 9000 in hyper terminal


when i try to connect the server through one xp client machine with the hp server.
its showing connected.
but its not showing anything...
4 REPLIES 4
Steven E. Protter
Exalted Contributor
Solution

Re: doubt on hp server R class 9000 in hyper terminal

Shalom,

Connect with a null modem to the port named console. It is labeled on the hardware.

The hyperterminal defaults should work find.

procomm plus works a little more easily than hyperterminal.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Torsten.
Acclaimed Contributor

Re: doubt on hp server R class 9000 in hyper terminal

Since I always had problems with hyperterminal I always use putty ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Matti_Kurkela
Honored Contributor

Re: doubt on hp server R class 9000 in hyper terminal

A serial terminal works very differently from a monitor screen.

A monitor's image is constantly refreshed by the display controller: if you have something on screen, switch the monitor off and then back on, the image will still appear on screen.

A terminal gets new data only when something is actually changing on the terminal's display. If you switch off and on a serial-connected terminal, its display will remain blank until you do something that causes new output to be sent to the terminal. A serial-connected terminal emulator software will behave just the same.

Select the hyperterminal window, then press Enter once or twice. Does a login prompt appear?

MK
MK
Michal Kapalka (mikap)
Honored Contributor

Re: doubt on hp server R class 9000 in hyper terminal

hi,

putty is great you don=t need to set speed it will be automatically working.

mikap