Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

help me

hpyjx
Regular Advisor

help me

I have rp8400 server,recently often hung ,must RS P1 PARTITION;my os hpux 11.11,and mp log alert follow:
456900 HPUX 0,2,1 *12 07/22/2010 15:37:22
Log Entry 456900: 07/02/2010 07:37:22
Alert Level 12: Software failure; Keyword:
Processor 0 ; Status: 0
Logged by HP-UX 9 during system panic subActivity e0
Legacy PA HEX chassis-code: be00
0xf8e091c01100be00 0x000000000000be00
0x58e099000000be00 0x00006e0602072516
456901 HPUX 0,2,1 *12 OS Panic 07/22/2010 15:37:22
Log Entry 456901: 07/02/2010 07:37:22
Alert Level 12: Software failure; Keyword: OS Panic
Processor 0 ; Status: 0
Logged by HP-UX 9 during system panic subActivity 0
System state change: OS Panic

sysrev:

MP:CM> sysrev

Cabinet FPGA and Firmware revision report

System Backplane : GPM FM OSP
------- ------- -------
1.002 1.002 1.002

PCI Backplane : LPM HS
------- -------
1.002 1.000

LPM BOB DRAIN PDHC PDC
------- ------- ------- ------- -------
CELL 0 : 2.001 1.000 1.000 2.000 15.007
CELL 1 : 2.002 1.000 1.001 2.004 17.008
CELL 2 : 2.002 1.000 1.001 2.004 15.007
CELL 3 : 2.001 1.000 1.000 2.000 17.008

FPGA MP
------- -------
Master Core IO : 1.000 4.022
Slave Core IO : 1.000 4.022

please tell me why ;and how to you in the future,
P0(CELL0,2) P1(CELL1,3)

3 REPLIES
Torsten.
Acclaimed Contributor

Re: help me

First of all the cells have different firmware, but the revision should be the same on all cells. If needed, ask HP for assistance.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
hpyjx
Regular Advisor

Re: help me

I have exchanged the cells;formerly C1,C3 IN P0 the same (hung ,and must be RS)
now I placed c1,c3 in P1(C1,C3)and same,s problem (hung,and must be RS)
Torsten.
Acclaimed Contributor

Re: help me

As said, first I would do the update, compare the lines, should look the same:

CELL 0 : 2.001 1.000 1.000 2.000 15.007
CELL 1 : 2.002 1.000 1.001 2.004 17.008

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!