Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

how to boot a vpar for MP CONSOLE?

huaxiang
Frequent Advisor

how to boot a vpar for MP CONSOLE?

how to boot a vpar for MP CONSOLE?
i want to test the system disk mirror?
1 REPLY
Torsten.
Acclaimed Contributor

Re: how to boot a vpar for MP CONSOLE?

You cannot interact with the boot loader, but you can force the boot to use the alternate path, example:

To boot winona2 using the configured alternate path:
winona2# vparboot -p winona2 -B alt

Same way to boot into single user mode:

winona1# vparboot -p winona2 -o â -isâ

or boot from tape:

winona1# vparboot -p winona2 -B TAPE


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!