Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

iLo Read Only Access

SOLVED
Go to solution

iLo Read Only Access

I am logged into my iLo on an 11.11 system and I only have read access as though someone else is logged in. Only 3 people total have access to this system and I am the only one on this particular server.

I have tried the Ctrl -ecf command but with each button I press I get the same message:
[Read only - user Ctrl-Ecf for console write access]
2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: iLo Read Only Access

Press CTRL (hold)
press e
release CTRL
press c
press f


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: iLo Read Only Access

That worked thanks