Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Showing results for 
Search instead for 
Did you mean: 

mp login

Frequent Advisor

mp login

server model rp3440

i need to take console login, but we dont have mp login ip and no console cable available.

but we have cross over cable. is it possiable to take mp login using cross wire cable .

if so can i have steps and where i have to connect cross cable in server to windows pc
stephen peng
Valued Contributor

Re: mp login

As I recall, the default MP lan setting should be: IP/, netmask/, so just modify you pc lan setting to and then connect the cross over cable to MP LAN and telnet, you should be able to login MP.
Acclaimed Contributor

Re: mp login

Depending on firmware version the default is DHCP.

So if you don't know the IP and you don't have a serial cable, try system management homepage from OS if it detects the MP.

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: mp login

Hi, If nothing works,

Reset the MP, set IP using ARP and MAC

"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie