Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

n4000 cann't self check

xuelanxing
Occasional Contributor

n4000 cann't self check

when i insert 5 cpus on n4000.The machine don't self check.but,when i insert 4 cpus,the machine is ok.THE CPU are 650Mhz,and insert 3 support modles.who can help me?
3 REPLIES
Ron Irving
Trusted Contributor

Re: n4000 cann't self check

Hi!!

Just to be sure, the loading order for the N4000 is 1,3,5,7, then 0,2,4,6

Pull the 6th cpu, and take a lint free cloth and wipe down the socket. Take a look at the cpu itself, and ensure no 'buttons' are missing, and then try again.

Hope this helps
Should have been an astronaut.
xuelanxing
Occasional Contributor

Re: n4000 cann't self check

thks for your reply
Ron Irving
Trusted Contributor

Re: n4000 cann't self check

Let me know how it works out!! (Don't forget the points!!)
Should have been an astronaut.