Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

no BCH on rp7410

Roro_2
Regular Advisor

no BCH on rp7410

Hello,

Our customer is not able to boot partition 0 (one cell in slot 1) of the rp7410 server.
I am not getting the BCH main menu.
The MP>VFP was showing the following :
"Boot_Cell_will_Halt
MEM_HATL_CELL
MEM_PD_GET_TIME_FAILED
MEM_DIMM_ERR_DEALLOCATED
BLOWR_FAIL"

NB: Memory DIMMs location:
4 x 512MB (A6097A)in rank 0
4 x 256MB (A6802A)in rank 1

I switched the DIMMs between ranks and i used only one rank with either DIMMs type but i am still facing the same problem.

Please advise.

Regards

Roger

5 REPLIES
Steven Schweda
Honored Contributor

Re: no BCH on rp7410

I know nothing, but ...

> BLOWR_FAIL"

Are the fans all turning?

A Google or Forum search for "BLOWR_FAIL"
might be interesting. For example:

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=363467
smatador
Honored Contributor

Re: no BCH on rp7410

Hi,
You have a BLOWR_FAIL, better phone to the hw support.
Roro_2
Regular Advisor

Re: no BCH on rp7410

Hi,

I think the problem is with the deallocated Memory not with the fans.

Roger
sujit kumar singh
Honored Contributor

Re: no BCH on rp7410

hi


yes there are mem fail as well as the blower fail, mem fail can cause you not get the BCH prompt. please log a hardware case with HP, might be cell board realted problem.

can you also give the SL and SEL that is system event logs that will be more clearer.

regards
sujit
Sameer_Nirmal
Honored Contributor

Re: no BCH on rp7410

I would look at the outputs of the followings

SEL and FPL

PS - T

PS - Cell 1