HPE 9000 and HPE e3000 Servers
1748195 Members
2623 Online
108759 Solutions
New Discussion юеВ

power supply mystery

 
Dave Chamberlin
Trusted Contributor

power supply mystery

Greetings, I have an rp8400. One of the 6 power supplies in the front was dead, so I got a replacement. When I put it in, it started blinking orange. From the MP console - all supplies show good, enabled, etc - but the light is still blinking. I attached images. Any ideas? Thanks
3 REPLIES 3
Dave Chamberlin
Trusted Contributor

Re: power supply mystery

Here is the image from the MP screen showing status....
Robert_Jewell
Honored Contributor

Re: power supply mystery

Two things you can check...

First off, continue on with viewing the PS, T output and look for the BPS fans to see if any are failing.

Second, view the event logs from the MP (SL, E) to see if any new events have been logged since you replaced the PS.

-Bob
----------------
Was this helpful? Like this post by giving me a thumbs up below!
Andrew Rutter
Honored Contributor

Re: power supply mystery

hi,

you might need to get the system mp to re-read the BPS status.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=2512349&prodTypeId=15351&objectID=c01913284

I do remember something similar on another system, where we had to do a soft reset of the MP to get it see the PSU's right with the xd command in the MP.

Andy