Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

"Memory address not found in MBAT" error

songyong
Advisor

"Memory address not found in MBAT" error

My customer have a rp3440 and for some reasons i power it downs for about 24h. When I power it again i find a fatal error in event log and can't login the OS. Is there any solustion? Event log is as following.

 

Log Entry 300: 23 May 2012 01:10:59

Alert Level 7: Fatal

Keyword: MEM_ERR_ADDR_NOT_IN_MBAT

Memory address not found in MBAT

Logged by: System Firmware  1

Data: Actual data

0xE38000BA01E01630 0003FFF0F05F00B0

1 REPLY
S_Logan
HPE Pro

Re: "Memory address not found in MBAT" error

Hi,

 

Memory address not found in MBAT>> The Memory mapping is not matching with the existing Map.

Ther is possiblity of firmware corruption in system.

 

This  issue might be need an onsite intervention, Please contact HP by logging a Hardware Case. 

HTH,

Surendar

Was the post useful? Click on the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt


I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!