Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
Showing results for 
Search instead for 
Did you mean: 

rp7400 gsp unexpected change in nvram data.

pete rees
Occasional Visitor

rp7400 gsp unexpected change in nvram data.

Hi , have problem with rp7400 intermittent crashes. Going into GSP the service log is full of entries "unexpected change in GSP nvram data" all with same date/time stamp , year 2106.
The XU diags appear to run OK.
We have changed the GSP battery and XD default reset but still same. Does this mean the GSP (core i/o) board is dead or am I missing something......many thanks , Peetee
pete rees
Occasional Visitor

Re: rp7400 gsp unexpected change in nvram data.

should read xd diags run ok and dc default reset

Re: rp7400 gsp unexpected change in nvram data.

Hi Pete,


My Suggestion would be contacting HP Solution Center/Call Center and log a call with  them.


Before logging the call, make sure the system has latest  gsp/system firmware and diagnostic tool installed.




How to assign KUDOS! Click the STAR!

HP Guided Troubleshooting -

I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!