Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

update users with 918lLX serveur using SS_CONFIG

CSP_ALGERIA
Frequent Advisor

update users with 918lLX serveur using SS_CONFIG


hello ,

we have an HP3000 model 918 LX PN A3116AW.
we want to update the numbre of user from 8 to 32 users using the SS_config tape .

we got the codeword from the response centre and we have access to the SS_CONFIG menu with SS> prompt.

we tape the command SWCAP 5 ( 5 for 32 users in dicimal means 0x51 in ss_config display in hex.

we are asked to select 0 for HPUX or 1 for MPE.
we have selected 1 .

at least we are asked to enter the A code ???
between 0 to 4095??

please what means the A code??
and what is number to input at this state ??

thanks



Nothing in the world can take the place of persistence.
2 REPLIES
Kwan Fong, Emile
Honored Contributor

Re: update users with 918lLX serveur using SS_CONFIG

Hello Omar,

SS_CONFIG is an utility used ONLY for HP personal. If you are not an HP employee, please contact your local HP office. SS_CONFIG information is confidential and should not be shared in a public Forum.
King is the customer!
CSP_ALGERIA
Frequent Advisor

Re: update users with 918lLX serveur using SS_CONFIG

hello ,

we have already done this , and all things are OK.
thank you
Nothing in the world can take the place of persistence.