HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

Blower failure on SD16A

Trng
Super Advisor

Blower failure on SD16A

Hi Team,

i have found one of the cabinet blower in my superdome failed (out of 4 ,one is shoiwng failed and 3 are ok)...Downtime required for replacing the failed cabinet blower ?.

Cabinet
Blowers
OK/
Failed/
N Status
========
3/1/N
rgds,trng
administrator
5 REPLIES
Kenan Erdey
Honored Contributor

Re: Blower failure on SD16A

hi,

blowers can be usually replaced online. and sd's blowers are hot-swap too.
Computers have lots of memory but no imagination
Torsten.
Acclaimed Contributor

Re: Blower failure on SD16A

These blowers are on the top of the cabinet - no downtime.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Steven E. Protter
Exalted Contributor

Re: Blower failure on SD16A

Shalom,

Hot swap. HP ships the part. Mostly people do these replacements themselves.

Just like on little proliant boxes.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
shanmuhanandam
Regular Advisor

Re: Blower failure on SD16A

Hi,
No downtime is required, it is hot swappable.
only two thumb screws will be there, so you can replace it by your own, if you have the spare.

Thanks,
Shan.
Trng
Super Advisor

Re: Blower failure on SD16A

ok
administrator