cancel
Showing results for 
Search instead for 
Did you mean: 

Confused.

SOLVED
Go to solution
Charles U Farley
Occasional Visitor

Confused.

I purchased a refurbished RP5470. It includes, what appears, 3 NIC's. One on the SCSI card, One on the Serial Card (GSP??), and a standalone NIC.

Which is the GSP and how in the heck do I determine which is which? When I swap cables and configured a couple of the NIC's with an ip, one immediately went disabled?
4 REPLIES
Patrick Wallek
Honored Contributor
Solution

Re: Confused.

The GSP lan is the one next to the serial plug.

I found that information on page 52 of the "Installation Guide, Third Edition - HP rp5400 Family of Servers" here:

PDF - http://docs.hp.com/en/A5191-96022/A5191-96022.pdf
HTML - http://docs.hp.com/en/A5191-96022/index.html

Torsten.
Acclaimed Contributor

Re: Confused.

GSP is the second card from bottom and not accessible for hp-ux.

The bottom slot is the core I/O and usually lan0.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Charles U Farley
Occasional Visitor

Re: Confused.

Thank you for clarifying this for me.
Charles U Farley
Occasional Visitor

Re: Confused.

Very helpful. Thank you.