cancel
Showing results for 
Search instead for 
Did you mean: 

Cpu enable

Waugh
Frequent Advisor

Cpu enable

Hi,

How to enable the CPU in NPAR.


Regards
Rkumar
3 REPLIES
Ron Irving
Trusted Contributor

Re: Cpu enable

Hi there!!

What type of system? If it's a PA-RISC system, the PDC menu would be a good place to start.

HTH

ron
Should have been an astronaut.
Waugh
Frequent Advisor

Re: Cpu enable

Hi ,

Its a PA-Rics system

Regards
Rkumar
Ron Irving
Trusted Contributor

Re: Cpu enable

Hi again!

From the PDC main menu, type 'co' for configuration. Then, I believe it's cpu# on. For example, if it's cpu3 that's deconfigured, type 'cpu3 on'

You will have to reboot at that time. Your cpu should come back at that time. If it doesn't, you will likely have to replace it. Do you have hardware maintenance on this system?

HTH

Ron
Should have been an astronaut.