cancel
Showing results for 
Search instead for 
Did you mean: 

Disks for N4000-36

SOLVED
Go to solution
DarkLord
Occasional Visitor

Disks for N4000-36

I have a N4000 with 2 - ST39102LC one wnet bad and the only spares I have are ST39103LC can I use this in conjucntion with the other above?

3 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: Disks for N4000-36

Hi,

if you compare the hp spare part numbers of the disks they are most likely the same (A5505-69003). Both disks are 9.1GB 10k rpm. Since both disks have the same hp product number, you can use it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
tkc
Esteemed Contributor

Re: Disks for N4000-36

try access to this partsurfer site :
http://partsurfer.hp.com/cgi-bin/spi/main

if both the parts are found in the part list for N4000 server, then it can be used.
tkc
Esteemed Contributor

Re: Disks for N4000-36

i checked out all the disk parts for N4000 from :

http://partsurfer.hp.com/cgi-bin/spi/main?sel_flg=partlist&model=N4000&HP_model=A3639B&modname=9000+Server+-+N4000+%28A3639B%29&template=main&plist_sval=ALL&plist_styp=flag&dealer_id=&callingsite=&strsrch=&keysel=Drive&catsel=Drives+and+Trays

it appeared to me that the part for 9GB disk is :

A5505-69003, 9GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 7,200 RPM, low profile (Seagate ST39102LC)

can't find any ST39103LC though. however if you can confirm your part is A5505-69003, it definitely can be used.