cancel
Showing results for 
Search instead for 
Did you mean: 

Event Logs full

SOLVED
Go to solution
S.S.
Super Advisor

Event Logs full

Hi,

In the MP console i have checked that the Event Logs are used upto 100%. If the logs has used upto 100% then it means it wouldn't capture the logs further if any error occurs?

Kindly recommend me in this case how can i proceed next step.

Thanks!
9 REPLIES
Sundar G
Frequent Advisor

Re: Event Logs full

Hi,

You can clear the logs and make it to 0%, logging will continue then.

In future, monitoring the alert logs, (event/chais) or system LED status, can be carried out to keep track.

- Sundar
rariasn
Honored Contributor

Re: Event Logs full

Michal Kapalka (mikap)
Honored Contributor

Re: Event Logs full

hi,

the next step should be :

1. capture all entries and archive

( check for some abnormalilties and errors )

2. clear the log

mikap
S.N.S
Valued Contributor
Solution

Re: Event Logs full

Hi SS,


You may need some of the logs, like
Event Log, before clearing all:
for eg.
MP>SL>E

You may dump all of it (by pressing D)
or
to get the lastest keep pressing ENTER till the time u feel the logs are needed.

I dont think you can dump to a file; you would need to manual copy n paste; or get the output logged.

After this, go back to SL (q- quit)

and just press c and ENTER.
All logs except iLO gets cleared.


Assign points to the good ppl who help you
:-)

HTH
SNS
"Genius is 1% inspiration, 99% Perspiration" - Edison
Dennis Handly
Acclaimed Contributor

Re: Event Logs full

>If the logs has used up to 100% then it means it wouldn't capture the logs further if any error occurs?

My guess this wouldn't be the best possible design. You want to capture the last bunch of entries, possibly discarding the lower severity ones first.

What model machine do you have?
Taifur
Respected Contributor

Re: Event Logs full

Hi,
capture all logs for using in future then clear all logs otherwise fornt panel amber led will be blinking.

Cheers,
taifur
S.S.
Super Advisor

Re: Event Logs full

Hi,

My OS model is 9000/800/rp3440 and the OS version is 11.11

Thank you.
S.S.
Super Advisor

Re: Event Logs full

Hi,

I have captured (backup) all the sl logs and cleared them.

Thank you All.
Torsten.
Acclaimed Contributor

Re: Event Logs full

Consider a firmware update to prevent too much meaningless logs.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=uk&prodTypeId=15351&prodSeriesId=2512013&swItem=pf-58098-1&prodNameId=1828449&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=0


MP FW : E.03.32
BMC FW : 03.52
System FW : 46.34

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!