HPE 9000 and HPE e3000 Servers
1748148 Members
3511 Online
108758 Solutions
New Discussion

FAILURE DETECTED

 
SOLVED
Go to solution
David Willams
Super Advisor

FAILURE DETECTED

I have the below message on all my cell boards..
what does this mean..

With the below fault can I install OS on the server & create a Virtual host & a Guest


HW status for Cell 0 : FAILURE DETECTED

Power status : on, CPU 0 MODULE FAULT
Faults above are latched. They are cleared just before the cell is powered on.
Boot is not blocked
PDH memory is shared
Processor Compatibility : OK
RIO cable status : connected
1 REPLY 1
Raj D.
Honored Contributor
Solution

Re: FAILURE DETECTED

David,
To check parstatus and see how many cpu you can see per cell board. Or is there anything missing.
Also check with top how many cpu.
It looks like you have a bad cpu or a cpu that is failing.
Also to check with
GSP-->CM-->PS
GSP-->CM-->DF -->Specific fru --> select CPU.
to check current cpu status,



Hth,
Raj.
" If u think u can , If u think u cannot , - You are always Right . "