HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

GSP Access on rp 2470

SOLVED
Go to solution
Grayh
Trusted Contributor

GSP Access on rp 2470

Hi All,

I do not have telnet access to the GSP on the rp2470... nor do I have the IP address for it... I do not know if an Ip has been configured for it.

Now I would like to access the GSP also remotely say from telnet or ssh.

How should I proceed...

Thank you
2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: GSP Access on rp 2470

Connect via serial line, get the lan information.

GSP> ls

configure if needed

GSP> lc

set up a user, if not already done, see

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1270620


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Grayh
Trusted Contributor

Re: GSP Access on rp 2470

thank u