HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

GSP IP Address - change

Sundar G
Frequent Advisor

GSP IP Address - change

Hi All,

We have an L class server running HP UX 11.11 and accidentally the IP Address of GSP got changed and now giving a conflict with other server, The conflicting server is working, but not GSP.
Any idea to reset the IP Address/getting back to the old status.
Actually i am working from remote. I tried stty reset on GSP, it resets it but still not working. Can anyone please help me?

Thanks

Regards

Sundar
7 REPLIES
Steven E. Protter
Exalted Contributor

Re: GSP IP Address - change

Shalom,

Changing the ip address and saving the configuration should result in an immediate cut off of your connection.

If this is not happening and your reset procedure is not working, you should take a look at dispatching the hardware team.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Sundar G
Frequent Advisor

Re: GSP IP Address - change

Hi,

Thanks for the email.

Is the working server not affected until the hardware team reaches to fix the GSP ?

Thanks

Sundar
sujit kumar singh
Honored Contributor

Re: GSP IP Address - change

hi


you can ask the MP cable to be disconnected physically to make sure that the working server is not affected till the hardware team reaches.


Regards
sujit
sujit kumar singh
Honored Contributor

Re: GSP IP Address - change

Hi Sundar,

the things in teh present scenario might just keep to the extent that IP Address of the Production Server LAN is not deconfigured or that the LAN Cable of the Prod Server does not face a disconnection, in that case if the LAN Cable of the MP of that server is connected, you shall face a real problem.


Regards
sujit
Suraj K Sankari
Honored Contributor

Re: GSP IP Address - change

Hi,

>>Is the working server not affected until the hardware team reaches to fix the GSP ?
Yes it is the working server might be giving problem better you can change you GSP IP ASAP.
To change the IP of GSP you have to attach a laptop physicaly into the server and then change the IP Address.

Suraj
Ron Irving
Trusted Contributor

Re: GSP IP Address - change

When you get a console/laptop hooked up to the GSP, type b to get into it, then type 'lc' to change your lan settings.

Just follow the prompt.

HTH
Should have been an astronaut.
sujit kumar singh
Honored Contributor

Re: GSP IP Address - change

Hi

as suggested by Ron, I also agree that the best thing in this situation is to get the MP Serial access and change the MP IP and then reset that using CM>XD -- R

So please if possible you can get someone Onsite Work on the MP with the serial access if possible, That would be the best possible approach and would be a clean one.

Regards
sujit