BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
HP 9000
Showing results for 
Search instead for 
Do you mean 

GSP telnet access

Go to Solution
Occasional Advisor

GSP telnet access

Dear All,

I have a problem logging into GSP using Telnet.
There is a screen shot of the message I'm getting in the word document attached.

Does anyone know what can be causing this, as I can connect to the log-in screen but after that it goes a bit funny.

Many thanks in advance

The Joy of HP-UX ain't nothing like it!
Honored Contributor

Re: GSP telnet access


This is the normal response when you log in.

Just do what it says, type Control/E then c then f and you will get console access.

Valued Contributor

Re: GSP telnet access

Yes, Your have to type " Ecf " to get the GSP prompt.
Once you are inside GSP, use " help list " to get the command list.
If you have to logout, use " co " to get the normal unix login.
I hope this help you.

I would like to be lie on a beautiful beach spending my life doing nothing, so someboby has to make this job.