HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

[HP 9000 rp 4440] MP Console failed

CreativeMAX
Frequent Visitor

[HP 9000 rp 4440] MP Console failed

Hi, I'm user from Thailand. I got problem to MP Console to HP 9000 rp4440, When I'm connect via serial port it always show blank screen any I try many time it don't work. Please suggest. 

6 REPLIES
Torsten.
Acclaimed Contributor

Re: [HP 9000 rp 4440] MP Console failed

Did you use the most left serial port?

Correct speed (9600)?

Try a reset - the button is left to the connector inside the chassis (accessible from outside).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
CreativeMAX
Frequent Visitor

Re: [HP 9000 rp 4440] MP Console failed

Did you use the most left serial port?

 

Serial (9 PIN) it only 2 Label port 

1. Auxiliary 

2. Remote. <-- I'm Connected with this port.


Correct speed (9600)?

 

Yes correct speed.


Try a reset - the button is left to the connector inside the chassis (accessible from outside).

 

could you help me to provide some picture I'm not familiar with HP-UX.

Torsten.
Acclaimed Contributor

Re: [HP 9000 rp 4440] MP Console failed

There are 3 serial ports (from left):

 

- MP local

- AUX

- remote (Modem)

 

 

You need to use the MP local port (most left).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
CreativeMAX
Frequent Visitor

Re: [HP 9000 rp 4440] MP Console failed

I've only 2 port from left just AUX & Remote, Any suggest ?

Torsten.
Acclaimed Contributor

Re: [HP 9000 rp 4440] MP Console failed

Sure it is a rp4440???

 

See attachment.

 

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
CreativeMAX
Frequent Visitor

Re: [HP 9000 rp 4440] MP Console failed

Thank you for advise, That my mistake it have 3 port and I'm plug serial to Remote Port. If I got any problem I'll ask you again thank you for kindly support.