HPE Community
HPE 9000 and HPE e3000 Servers
1752579 Members
4479 Online
108788 Solutions
New Discussion

HP 9000 rp3410 does not boot

 
Claidy
Occasional Contributor

‎05-23-2017 02:41 AM

‎05-23-2017 02:41 AM

HP 9000 rp3410 does not boot

Hello,

I'm working on a server HP 9000 rp 3410. the probleme is that the server does not boot when I press the power button. The server make the sound of starting up ( It a kind of music), but after that, silence......

The MP LAN is not giving me access. I used the arp -s comman to assigne an iP address the MP LAN, but no success.

How can I now troubleshoot this server??

Please Help!

 

0 Kudos
1 REPLY 1
Torsten.
Acclaimed Contributor

‎05-23-2017 03:48 AM - edited ‎05-23-2017 03:49 AM

‎05-23-2017 03:48 AM - edited ‎05-23-2017 03:49 AM

Re: HP 9000 rp3410 does not boot

You need the logs from the MP.

Check if the MP get a DHCP address, this would be the default setting.

You may try also to get a serial connection to the MP, the MP is working as long as power is plugged in.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.