HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 9000 rp3410 ilo login and password

ABOUBEKRINE SAKHO
Occasional Visitor

HP 9000 rp3410 ilo login and password

Hi,
We have just purchased a brain new HP server mentionned above. We've linked the server and a laptop via a network cable to configure it because the server has no video card :(. We used the arp command to assign an IP address. We then opened a web browser and tiped the server ip adress, but it asks us a login and a a password. We tried admin/admin, but it did not work and it seems that the password is too short. I read somewhere that a part of the serial number is used for the password, but i dont know how and unfortunately i cannot do anything without that userid and that password. I hope that someone can help. Sorry for my poor english as im a french-speaking person.
Thanks for your help.
Regards.
6 REPLIES
Torsten.
Acclaimed Contributor

Re: HP 9000 rp3410 ilo login and password

You can check the user settings from the serial line - are you able to login there?

Default is Admin/Admin (capital A) - operator is Oper/Oper.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ABOUBEKRINE SAKHO
Occasional Visitor

Re: HP 9000 rp3410 ilo login and password

Hi,
Thanks for your reply. What do you mean serial line and how can i get that there? I tried Admin/Admin unsuccessfully.
Rgds.
S_Logan
HPE Pro

Re: HP 9000 rp3410 ilo login and password

Hi ,

Please check the rear (back) side of the server you can see MANAGMENT SERAL 25 pin serial port and serial A 9 pin port.

from the above said port you can access MP/Console by connecting a SERIAL CABLE TO teh respective serail port to your laptop serial port.

After connecting the LAPTOP via serial cable , use HYPER TERMINAL to open the session with the server.

if you get local console login screen (HPUX login) then PRESS CTRL+B key it will give you, MP login prompt,

here you can use Admin/Admin or Oper/Oper or NO userame/password (press enter/enter to continue)as username/password.

if you are in the MP prompt MP>CM>LS command will lan status.

MP>CM>LC option will give to reconfigure lan parameter.


NOTE : In MANAGEMENT PORT(25 PIN serial PORT) W cable should be used .

W cable will give 3 9 pin seral functions= CONSOLE/REMOTE/MODEL
HTH
I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!
ABOUBEKRINE SAKHO
Occasional Visitor

Re: HP 9000 rp3410 ilo login and password

Hi,
I tried admin/admin; no/no; oper/oper mmbut unfortunately none of them works.
Thx for ur reply.
addy07
Occasional Visitor

Re: HP 9000 rp3410 ilo login and password

Press

CTRL and e

release CTRL

press

c

press

f

and you get write access.

Dennis Handly
Acclaimed Contributor

Re: HP 9000 rp3410 ilo login and password

To get a list of all the commands:

^Ec?