HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 9000 rp3440 iLO MP GUI access

SOLVED
Go to solution
Phillip Popp
Regular Advisor

HP 9000 rp3440 iLO MP GUI access

Hi,
I have a iLO MP I just got on the network. not familiar with iLO MP at all. Telnet works great but I would like to use the web interface.

when I type in the ip address it finds the MP and tries to load the images but I just get a image square that did not load properly. I have tried internet explorer and Firefox and get the same results.

I have the telnet and web interface enabled?

any ideas would surly be appreciated.


MP firmware is E.02.10

Thanks,

Phil

1 REPLY
Andrew Rutter
Honored Contributor
Solution

Re: HP 9000 rp3440 iLO MP GUI access

hi,

the ILO is heavily dependent upon java applets and so on, so i would check this out.

but first you need to update the MP firmware version to E.03.13 minimum

see page 14
http://www.filibeto.org/unix/hp-ux/lib/hardware/systems/a500/5971-4274_iLO_ops.pdf

also this threasd if you havent already

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1276945742787+28353475&threadId=1228347

Andy