HPE 9000 and HPE e3000 Servers
1748113 Members
3434 Online
108758 Solutions
New Discussion

HP 9000 rp3440 iLO MP GUI access

 
SOLVED
Go to solution
Phillip Popp
Regular Advisor

HP 9000 rp3440 iLO MP GUI access

Hi,
I have a iLO MP I just got on the network. not familiar with iLO MP at all. Telnet works great but I would like to use the web interface.

when I type in the ip address it finds the MP and tries to load the images but I just get a image square that did not load properly. I have tried internet explorer and Firefox and get the same results.

I have the telnet and web interface enabled?

any ideas would surly be appreciated.


MP firmware is E.02.10

Thanks,

Phil

1 REPLY 1
Andrew Rutter
Honored Contributor
Solution

Re: HP 9000 rp3440 iLO MP GUI access

hi,

the ILO is heavily dependent upon java applets and so on, so i would check this out.

but first you need to update the MP firmware version to E.03.13 minimum

see page 14
http://www.filibeto.org/unix/hp-ux/lib/hardware/systems/a500/5971-4274_iLO_ops.pdf

also this threasd if you havent already

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1276945742787+28353475&threadId=1228347

Andy