cancel
Showing results for 
Search instead for 
Did you mean: 

HP RP3440

SOLVED
Go to solution
HP RX4640
Frequent Advisor

HP RP3440

I have two rp3440's that I pruchased I hooked a 700/92 console up to view configuration information etc.

All that I can get to come up on the console at boot is jibberish as if the console is wrong but I know it's not I have used this console on many rp3440's in the past.

I need it to boot to MP but have no clue what is wrong????

I do not have the ability to use putty or network console is my only current option.
4 REPLIES
James R. Ferguson
Acclaimed Contributor
Solution

Re: HP RP3440

Hi Jim:

Try resetting the console by holding down the "D" key while you recylce its power.

Regards!

...JRF...
Duncan Edmonstone
Honored Contributor

Re: HP RP3440

DO you actually have the W cable installed that splits the 25 pin port on the back of the boxes into 3 x 9 pin connections for UPS, Serial and Console?

Have you reset the old consoles to their default settings (seem to remember you keep the 'd' key pressed down while you turn them on until it prints a message...

HTH

Duncan

HTH

Duncan
HP RX4640
Frequent Advisor

Re: HP RP3440

I'll try that.. I used both the Serial console port and the console / ups port.
HP RX4640
Frequent Advisor

Re: HP RP3440

Worked.. THank you