SOLVED
Does "CL" show anything?
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
>> except the motherboard changed by HP
OK, I guess the reason is a wrong model string set for this system.
Is it really a rp3410 or is it originally a rp3440?
What does the pull out label say?
We need the console to correct this.
Are 2 CPUs installed?
Remove one.
Remove all memory except the first pair.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
If the board is a factory new board, it works like this:
READ THE VALUES FROM THE PULL-OUT TAB!
Main Menu: Enter command or menu > ser
---- Service Menu ------------------------------------------------------------
Command Description
------- -----------
CLEARPIM Clear (zero) the contents of PIM
SCSI [option] [<path>] [<val>] Display or set SCSI controller values
MemRead <address> [<len>] Read memory and I/O locations
PDT [CLEAR] Display or clear the PDT
PIM [<proc>] [HPMC|LPMC|TOC] Display PIM information
ProductNum <O|C> [<number>] Display or set Product Number
ScRoll [ON|OFF] Display or change scrolling ability
SELftests [ON|OFF] Enable/disable self test execution
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<command>] Display help for specified command
RESET Restart the system
MAin Return to Main Menu
----
Service Menu: Enter command > init
***********************************************************
*This command allows you to set the System Serial Number *
*and Product Number to its correct values. Once set, the *
*values may not be changed. *
* *
*You may Quit this command when asked to confirm either of*
*the values. If you do quit, you may start this command *
*again. *
* *
*The Product and Serial Numbers are located on the system *
*product label. It may be a pullout tab on some systems. *
***********************************************************
Product Number has this format: A####? or A#####?
Original Product Number is:
To change, enter the Original Product Number otherwise press Return: A7137A
This action cannot be undone.
Confirm Original Product Number A7137A [Y/N/Q(uit)]? y
The system has been initialized with Product Number. A7137A
Example of valid System Serial Number:USC4041B9K
You should not use this example for the System Serial Number.
There is no Serial Number for this system.
Enter the System Serial Number, <RETURN> for default: DEXXXXXXXXX
This action cannot be undone.
Confirm System Serial Number DEXXXXXXX [Y/N/Q(uit)]? y
The system has been initialized with Serial Number DEXXXXXXX
Service Menu: Enter command > upgrade
System serial number: DEXXXXXXX
Enter key from key certificate for this serial number: CXXXXXXX
Current system: 9000/800/rp3410 PA8800 1 socket 1 core restricted speed DC--
Upgraded system: 9000/800/rp3440 PA8800 2 sockets 4 cores
Do you wish to continue with this change? [y/n]: y
You must restart the system to complete this change.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
Obviously the board was replaced but not configured.
The default setting is rp3410 - limited in CPU, memory and PCI slots.
It you have too many of them, it will not boot.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!