HPE Community
HPE 9000 and HPE e3000 Servers
1751842 Members
5822 Online
108782 Solutions
New Discussion

Re: HP9000 rp3440 console/serial not responding

 
SOLVED
Go to solution
startin71
Occasional Visitor

‎01-29-2014 01:23 PM - edited ‎01-29-2014 02:45 PM

‎01-29-2014 01:23 PM - edited ‎01-29-2014 02:45 PM

Re: HP9000 rp3440 console/serial not responding

Torsten:

Right, I use console of cable.

Understand about batteries.

Nothing happend. No banner text.

 

COM1 you mean port on attachted picture?

Nothing happend after 5 minutes. Status LED is flashing green and Diagnostic LED number 2 is on.

 

If the DHPC will works how should I connect? Telnet? SSH?

DHCP doesn't work too. I try reset button (hold for 10 seconds). 

0 Kudos
Torsten.
Acclaimed Contributor

‎01-29-2014 11:19 PM

‎01-29-2014 11:19 PM

Re: HP9000 rp3440 console/serial not responding

COM1 becomes the console if no MP card is present.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.