HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

KVM Switch for RP4440

Dharmu
Contributor

KVM Switch for RP4440

Hi,

I would apperciate if some one helps to configure the KVM switch for RP4440 server.And also kindly confirm whether i can get remote console login for the KVM switch with IP based.I had 4 RP4440 servers to be configure with KVM and IP based console remotely from my desktop to enable the CDE session.

Thanks & Regards
Dharmu
2 REPLIES
Torsten.
Acclaimed Contributor

Re: KVM Switch for RP4440

Hi Dharmu,

the standard model doesn't have VGA. This port is disabled and only works in the Integrity server rx4640 (same chassis).

So a KVM switch can only be connected via serial line, but for this you can also use the built-in MP IP connection.

You can work with CDE via "normal" IP network, so I think you don't really need any KVM switch or you can't even use it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Dharmu
Contributor

Re: KVM Switch for RP4440

Hi,

I already installed Graphics card on all servers.