L2000 GSP red light

[TYP3R]

Hi all

I have an L2000 server and at the back of the GSP theres a red light showing, The server rebooted itself yesterday and now the red light is showing at the back of the GSP. Does this mean that it's faulty ? The server is up and running fine now but just that red light showing.. Any help would be great on this

I'm not in the office this week so i cant do anything to it , but if i read all the GSp log would that light disappear?

William

[Torsten.]

Red or amber?

Can you access the GSP?

Try

#stty +queryGSP
if needed
#stty +resetGSP

[TYP3R]

Hi Torsten

I've attached a copy of the lasted GSP log that i got from the lads, back at the office and it looks like i might a battery failure on the card itself as the time stamp have gone back to 1970

William

[Torsten. · Accepted solution]

a battery failure sounds reasonable ...

[TYP3R]

Hi Torsten

Is the battery a straight swap and leave it for a while and my settings will go back to normal or would i need to configure my it back ?

William

[Torsten.]

You need to configure the IP settings along with the user accounts (for the GSP, not the server itself).