cancel
Showing results for 
Search instead for 
Did you mean: 

MP verision update

pa8700
Regular Advisor

MP verision update

HI all pls fine the sysrev out put below ...I can see a version difference of MPs and needs update . Can I do the MP Fw update through patch online...

Model : 9000/800/S16K-A

$ uname -a
HP-UX brsjq003 B.11.11 U 9000/800 3956403071 unlimited-user license


MP:CM> sysrev

Cabinet FPGA and Firmware revision report

System Backplane : GPM FM OSP
------- ------- -------
1.002 1.002 1.002

PCI Backplane : LPM HS
------- -------
1.002 1.000

LPM BOB DRAIN PDHC PDC
------- ------- ------- ------- -------
CELL 0 : 2.002 1.000 1.001 2.004 17.009
CELL 1 : 2.002 1.000 1.001 2.004 17.009
CELL 2 : 2.002 1.000 1.001 2.004 17.009
CELL 3 : 0.000 0.000 0.000 0.000 0.000

FPGA MP
------- -------
Master Core IO : 2.008 4.020
Slave Core IO : 2.008 4.025
5 REPLIES
Keith Bryson
Honored Contributor

Re: MP verision update

I think I'm correct when I say that this refers to the RP8400? If so, please find the latest firmware download on this link:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=2512349&swItem=PF-CKEYMAT0605&prodNameId=86792&swEnvOID=7&swLang=13&taskId=135&mode=3

Please read the release notes carefully, the installation instructions are at the bottom.

Best regards and hope that helps
Keith
Arse-cover at all costs
DdeBlance_2
Advisor

Re: MP verision update

pa8700,

From the MP>CM run DFW and dunplicate the firmare.

Torsten.
Acclaimed Contributor

Re: MP verision update

AFAIK you cannot duplicate the MP firmware.

You need to update according to the release notes.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
cnb
Honored Contributor

Re: MP verision update

From the Release Notes, you can't use DFW to duplicate or update MP Firmware:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=2512350&swItem=pf-53620-2&prodNameId=392498&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=1

* MP firmware is not an updatable entity using DFW but was
displayed in the output of the command. The DFW command has
been modified and no longer displays the MP firmware
entity.

As stated, read the release notes...


Rgds,

sujit kumar singh
Honored Contributor

Re: MP verision update

hi

for the cell based systems FW upgrade, please get in touch with a trained HP FE, logging a case with HP.


HP recommneds upgrade of FW to be done by trained HP FE only for Cell-based systems.


regards
Sujit