HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

Main Menu displayed after added 2 HD to K570

SOLVED
Go to solution
Peter Chuang
Frequent Advisor

Main Menu displayed after added 2 HD to K570

Hi Experts,

I added 2 more internal HD to K570 server. Instead of booting from the original boot drive, now the server is displaying the "Main Menu". What do I do now?

Thanks in advance.

Peter C.
4 REPLIES
Dennis Handly
Acclaimed Contributor
Solution

Re: Main Menu displayed after added 2 HD to K570

You could try removing them to see if it still boots.
Do you have a SCSI ID conflict between the new and old disks?
Peter Chuang
Frequent Advisor

Re: Main Menu displayed after added 2 HD to K570

I will try to remove the newly installed 2 HDs and reboot again.

How do I identify the SCSI IDs?
Torsten.
Acclaimed Contributor

Re: Main Menu displayed after added 2 HD to K570

SCSI IDs are set via jumpers directly on the back of the drive.

Since you asked for this; I assume you have duplicated IDs...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Peter Chuang
Frequent Advisor

Re: Main Menu displayed after added 2 HD to K570

I assigned SCSI IDs for disk3 and disk4. Now the server booted normally. Thanks.