HPE Community
HPE 9000 and HPE e3000 Servers
1752546 Members
4866 Online
108788 Solutions
New Discussion

Re: Move from 700/96 Terminal to Thin Client

 
Andrew_M
Occasional Visitor

‎10-30-2013 04:09 AM

‎10-30-2013 04:09 AM

Move from 700/96 Terminal to Thin Client

Hi, I have an rp3410.

 

It was previously connected to an 700/96 Terminal via cable 24542G, but I would like to be able to connect this to our t5000 series thin client and use that in future.

 

Could anyone advise if it is 'simply' a case of connecting this cable to the thin clients parallel port and then configuring the terminal emulator; or would I need a completely different cable that would connect into its serial port?

 

Many thanks

 

Andrew 

0 Kudos
1 REPLY 1
Torsten.
Acclaimed Contributor

‎10-30-2013 06:23 AM

‎10-30-2013 06:23 AM

Re: Move from 700/96 Terminal to Thin Client

I think you currently have 25 pin to 9 pin, but you probably need 9 pin to 9 pin.

 

This cable would be nothing special, just null modem.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.