Need steps for rp5405 disk firmware upgradation

[Joseph Samuel]

Hello all,

our customer has rp5405 and rp7410 server i need to know how to upgrade the firmware of these server disks.

the following is the diskinfo output of one of the rp5405 disk.

iocbk101:/tmp>>diskinfo -v /dev/rdsk/c2t0d0
SCSI describe of /dev/rdsk/c2t0d0:
vendor: HP 73.4G
product id: MAN3735MC
type: direct access
size: 71687369 Kbytes
bytes per sector: 512
rev level: HP07
blocks per disk: 143374738
ISO version: 0
ECMA version: 0
ANSI version: 2
removable media: no
response format: 2
(Additional inquiry bytes: (32)4e (33)30 (34)30 (35)30 (36)35 (37)32 (38)36 (39)20 (40)20 (41)20 (42)20 (43)46 (44)55 (45)4a (46)49 (47)54 (48)53 (49)55 (50)20 (51)0 (52)0 (53)0 (54)40 (55)b (56)18 (57)1 (58)3c (59)1 (60)9b (61)0 (62)0 (63)0 (64)0 (65)0 (66)0 (67)0 (68)0 (69)0 (70)0 (71)0 (72)0 (73)0 (74)0 (75)0 (76)0 (77)0 (78)0 (79)0 (80)0 (81)0 (82)0 (83)0 (84)0 (85)0 (86)0 (87)0 (88)0 (89)0 (90)0 )

[Joshua Scott]

http://www.hp.com

click software & driver downloads

type 'rp7410' into the search box, and click the arrow

click 'Cross operating system (BIOS, Firmware, Diagnostics, etc.)'

click download

This matches the disk you have displayed in your message. You may have to search around if you don't have the same disk in both servers.

Josh

[Joshua Scott]

Firmware upgrades on disks are usually done through STM. If you don't know how to do it, I would strongly recommend that you have HP or your service provider do it for you.

The firmware file should be in /var/tmp before running the Firmware Update tool in STM. Note that you may lose all your data if you run the update, or cause the disk to be unusable. Make sure you really need the firmware to be updated before you proceed.

Josh