HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

PA-8600 A3639C/N-4000 ROM error

N/A

PA-8600 A3639C/N-4000 ROM error

any chance to fix the following VFP ALERT ?

***** EARLY BOOT VFP : SYSTEM ALERT *****
ALERT LEVEL: 15 = Fatal hardware or configuration problem prevents operation

REASON FOR ALERT
SOURCE: 3 = PDH
SOURCE DETAIL: 2 = ROM SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail

LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH OFF ON ON
LED State: Running non-OS code. Non-critical error detected.

any help appreciated.

 

----------------------------------------------------------------------------------------------------------------------------------------------

P.S. This thread has been moved from Servers> Appliance Servers to Servers> HP 9000- Forum Moderator

2 REPLIES
Robert_Jewell
Honored Contributor

Re: PA-8600 A3639C/N-4000 ROM error

> 02-19-2009 10:05 AM - last edited yesterday by Moderator

 

----------------
Was this helpful? Like this post by giving me a thumbs up below!
RASHMI
Trusted Contributor

Re: PA-8600 A3639C/N-4000 ROM error

Hi Robert,

Actually, earlier the movement from BSC to ITRC was not possible. They were distributed separately. Therefore after the migration of all BSC and ITRC threads into Lithium platform and also the consolidation into one board, it is possible to move into desired category. For this reason I have stated the P.S. sentence in that thread that the thread has been moved; I have not edited the queries in that post.

Kindly let me know if I have answered to your doubts.
Thanks,
Rashmi
Forum Moderator