HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

RP8400 Changing the cell name

rcarpent
Occasional Visitor

RP8400 Changing the cell name

We have a RP8400 with 4 NPAR with HPUX 11.23 installed cell 0, 1, 2, 3. Is there a way to change the name from cell 0 to say prod1?
Rob
3 REPLIES
Torsten.
Acclaimed Contributor

Re: RP8400 Changing the cell name

You cannot change cell names, but you can change nPar names (see parmodify).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
sujit kumar singh
Honored Contributor

Re: RP8400 Changing the cell name

you can also change the Complex names, but the cell names cant be changed.

to change the NPAR name you can use the "pd" command from the BCH or parmodify -p 1 -P like to change the name of NPAR "1".

to change the complex name you can use the cplxmodify -N or "id" from the BCH and to see the current complex name parstatus -X.

regards
sujit
rcarpent
Occasional Visitor

Re: RP8400 Changing the cell name

OK Thanks for the help to all. That was correct parmodify. Thanks again.