cancel
Showing results for 
Search instead for 
Did you mean: 

RP8400

Malone
Advisor

RP8400

Hi ,
i have this problem on my rp8400.

# Location Alert Keyword Timestamp
194 PDC 0,1,0 *6 0x180043600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
194 PDC 0,1,0 *6 0x58004b0000006310 0x00006c0b0b122f35 12/11/2008 18:47:53
193 PDC 0,1,0 *6 0x180042600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
193 PDC 0,1,0 *6 0x58004a0000006310 0x00006c0b0b122f35 12/11/2008 18:47:53
192 PDC 0,1,0 *6 0x180047600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
192 PDC 0,1,0 *6 0x58004f0000006310 0x00006c0b0b122f34 12/11/2008 18:47:52
191 PDC 0,1,0 *6 0x180045600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
191 PDC 0,1,0 *6 0x58004d0000006310 0x00006c0b0b122f1f 12/11/2008 18:47:31
190 PDC 0,1,0 *6 0x180044600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
190 PDC 0,1,0 *6 0x58004c0000006310 0x00006c0b0b122f1f 12/11/2008 18:47:31
189 PDC 0,1,0 *6 0x180046600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
189 PDC 0,1,0 *6 0x58004e0000006310 0x00006c0b0b122d31 12/11/2008 18:45:49
188 PDC 0,1,0 *6 0x180042600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
188 PDC 0,1,0 *6 0x58004a0000006310 0x00006c0b0b122d00 12/11/2008 18:45:00
187 PDC 0,1,0 *6 0x180041600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
187 PDC 0,1,0 *6 0x5800490000006310 0x00006c0b0b122d00 12/11/2008 18:45:00
186 PDC 0,1,0 *6 0x180046600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
186 PDC 0,1,0 *6 0x58004e0000006310 0x00006c0b0b122d00 12/11/2008 18:45:00
185 PDC 0,1,0 *6 0x180044600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
185 PDC 0,1,0 *6 0x58004c0000006310 0x00006c0b0b122c26 12/11/2008 18:44:38
184 PDC 0,1,0 *6 0x180043600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
184 PDC 0,1,0 *6 0x58004b0000006310 0x00006c0b0b122c26 12/11/2008 18:44:38
MP:VWR (,,+,-,D,F,L,J,V,H,^B) >

from the VFP output :

1 partition booting 1083 logs

and nothing more.
Sure the partition can't boot.
Any Idea?
thx Max

7 REPLIES
cnb
Honored Contributor

Re: RP8400

Cell 1 is reporting an error condition in the system. *6 indicates boot possible pending failure or environmental condition. Go back in the logs to find the first occurance and the error(s) prior to that. Post those errors.

HTH,
Andrew Rutter
Honored Contributor

Re: RP8400

hi,

This means that the PDC is logging errors between the primary and secondary logging modes.

See this link and scroll down to event number 1696

http://docs.hp.com/en/diag/ems/fpl_em.htm

I cant help with decoding the chassis log data fields further but Hp can. Time to log a call

Andy
Prashanth.D.S
Honored Contributor

Re: RP8400

Hi,

How many npars configured ? Are you not able to boot the partition atall ? I can see the errors are from Cabinet 0 Cell 1 CPU 0..

Can you send the following output from MP ??

MP:CM>ps
Select Device: t

MP:CM>ps
Select Device: c

Check for any failure on either of these logs..

Best Regards,
Prashanth
Malone
Advisor

Re: RP8400

MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+-----+-------+-------+-----------+
| | | | | | |
| | | Sys | | IO | Bulk Pwr |
|Cab| MP |Bkpln| Cells |Chassis| Supplies |
| # |M S| |0 1 2 3| 0 1 |0 1 2 3 4 5|
+---+----+-----+-------+-------+-----------|
| 0 |* | * |* * | * * |* * * * |
+---+----+-----+-------+-------+-----------+

You may display detailed power and hardware status for the following items:

T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: t

HW status for rp8400 cabinet : NO FAILURE DETECTED

Power switch is on
Right Door is closed
Top Door is open
Left Door is closed

Total Power Available 4000 VA
Total Power Needed 2532 VA
Power Redundancy : redundant
Power Viability : viable


Power Status
---------------+-----+-------+-------+-----------+
| | | | |
| Sys | | IO | Bulk Pwr |
|Bkpln| Cells |Chassis| Supplies |
| |0 1 2 3| 0 1 |0 1 2 3 4 5|
---------------+-----+-------+-------+-----------|
Populated | * |* * | * * |* * * * |
Enabled | * |* * | * * |* * * * |
Power OK | * |* * | * * |* * * * |
Warning/Fault | | | | |
Attention LED | | | | |


AC Line status:
Line A0 Present
Line B0 NOT PRESENT
Line A1 Present
Line B1 NOT PRESENT

-- Press to continue, or 'Q' to Quit --

Front Fan Speed : normal
Rear Fan speed : normal
I/O Bay Fan Speed : high
Temperature state : normal
Fan Redundancy : redundant
Overtemp Shutdown Enabled


| BPS | PCI |
| Fans | Fans |
| 0 1 2 3 4 5 | 0 1 2 3 4 5 |
+-----------+-------------+-------------+
Populated | * * * * | * * * * * * |
Failing | | |
Failed | | |

| Standby/Main Fans |
| 1 1 1 1 1 1 1 1 1 1 2 |
| 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 |
+-----------+-------------------------------------------+
Populated | * * * * * * * * * * * * * * * * * * * * * |
Failing | |
Failed | |

| Cell Fans |
| 0 1 2 3 4 |
+-----------+-----------+
Cell 0 | |
Populated | * * * |
Failing | |
Failed | |
Cell 1 | |
Populated | * * * |
Failing | |
Failed | |

MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+-----+-------+-------+-----------+
| | | | | | |
| | | Sys | | IO | Bulk Pwr |
|Cab| MP |Bkpln| Cells |Chassis| Supplies |
| # |M S| |0 1 2 3| 0 1 |0 1 2 3 4 5|
+---+----+-----+-------+-------+-----------|
| 0 |* | * |* * | * * |* * * * |
+---+----+-----+-------+-------+-----------+

You may display detailed power and hardware status for the following items:

T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: c
Enter cell number: 0

HW status for Cell 0 : NO FAILURE DETECTED

Power status : on, no fault
Boot is not blocked
PDH memory is shared
RIO cable status : connected
RIO cable connection physical location : IO Chassis 0
Core cell is cell 0
Attention Led is off

PDHC status Leds : ****

0 1 2 3
CPUs Populated * *

DIMMs populated:
0 . . . 4 . . . 8 . . .12 . . .
* * * *

1 1 1
VRM's 1 2 3 4 5 6 7 8 9 0 1 2
Present : * * * * * * * * * * *
Enabled : * * * * * * * * * * * *
Pwr Good : * * * * * * * * * * *


Cell Board DIP Switches : b'00000011
Clock type : Piranha_pll
Frequency Select reg : 0x13
CPU Clock Select : System Backplane Clock @ 130 MHz
CPU PLL : Enabled
CPU VREF control : Ground
CPU Type : PA8700
CPU Speed Bits : 0xf
Dip switch settings are valid

System Boot Rom (PDC) firmware rev 17.009
PDH controller (PDHC) firmware rev 2.04, built MON JAN 12 18:20:02 2004
IceBoy revision is 1.0

MP:CM>
cnb
Honored Contributor

Re: RP8400

"You may display detailed power and hardware status for the following items:

T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: c
Enter cell number: 0

HW status for Cell 0 : NO FAILURE DETECTED"

What about Cell 1? You need to check the status for cell 1.

HTH,
Sherif A. Louis
Valued Contributor

Re: RP8400

this seems like an Cell controller issue (DNA) and CPU 0 is the reporting entity which is probably the monarch CPU. what's ur complex configuration? which cells in which partitions?
Malone
Advisor

Re: RP8400



MP:CM> cp

--------------
Cabinet | 0 |
--------+----+
Slot |0123|
--------+----+
Part 0 |*...|
Part 1 |.*..|

MP:CM>