SPU Power is Down

[Ramana.Sv]

Hi,

My HP9000 serevr is down , now iam getting
"gsp": prompt what is the error?, how can i up my server can any one help me.....



Thanks
Ramana

[Torsten.]

If the server is powered off - power it on!

The command depends of the model of server - it is either "pc" or "pe" from the management processor.

[Ramana.Sv]

I tried poweroff and on but its not getting on, is there any probelme with hradware?

[Torsten.]

What server is it?

[Ramana.Sv]

model : 9000/800/A500-6X

HP-UX 11i Releases

[Torsten.]

Check the status with

GSP> ps

and the logs:

GSP> sl


SL

Select Chassis Code Buffer to be displayed:
Incoming, Activity, Error, Current boot or Last boot? (I/A/E/C/L) e
e

[Ramana.Sv]

when i enter ps & sl commands
i got
system power state:OFF
power switch:On

[Torsten.]

So it is off.


If you don't want to give more information surely nobody can help you. I would expect much more information from "SL" - even the "ps" gives you more like this:

GSP> ps


PS

Power Monitor Status:
Firmware Revision : 7
System Power state: On Power Switch : On
Temperature : Normal Selected fan state: Normal

Power supplies | Fan
# State Type | States
-----------------------------------------------------------
0 Normal Type 0 | Normal
1 - - | Normal
2 - - | Normal
3 - - | Normal
4 - - | Normal

[Torsten.]

BTW, your profile shows:

I have assigned points to 25 of 243 responses to my questions



You should really read this:

http://forums11.itrc.hp.com/service/forums/helptips.do?#33




I guess people will stop posting to your question if you never come back to your threads - no response, no thank you, no points for most of your last threads!

Good luck!