Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
cancel
Showing results for 
Search instead for 
Did you mean: 

SPU Power is Down

Ramana.Sv
Frequent Advisor

SPU Power is Down

Hi,

My HP9000 serevr is down , now iam getting
"gsp": prompt what is the error?, how can i up my server can any one help me.....



Thanks
Ramana
8 REPLIES
Torsten.
Acclaimed Contributor

Re: SPU Power is Down

If the server is powered off - power it on!

The command depends of the model of server - it is either "pc" or "pe" from the management processor.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ramana.Sv
Frequent Advisor

Re: SPU Power is Down

I tried poweroff and on but its not getting on, is there any probelme with hradware?

Torsten.
Acclaimed Contributor

Re: SPU Power is Down

What server is it?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ramana.Sv
Frequent Advisor

Re: SPU Power is Down

model : 9000/800/A500-6X

HP-UX 11i Releases
Torsten.
Acclaimed Contributor

Re: SPU Power is Down

Check the status with

GSP> ps

and the logs:

GSP> sl


SL

Select Chassis Code Buffer to be displayed:
Incoming, Activity, Error, Current boot or Last boot? (I/A/E/C/L) e
e


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ramana.Sv
Frequent Advisor

Re: SPU Power is Down

when i enter ps & sl commands
i got
system power state:OFF
power switch:On



Torsten.
Acclaimed Contributor

Re: SPU Power is Down

So it is off.


If you don't want to give more information surely nobody can help you. I would expect much more information from "SL" - even the "ps" gives you more like this:

GSP> ps


PS

Power Monitor Status:
Firmware Revision : 7
System Power state: On Power Switch : On
Temperature : Normal Selected fan state: Normal

Power supplies | Fan
# State Type | States
-----------------------------------------------------------
0 Normal Type 0 | Normal
1 - - | Normal
2 - - | Normal
3 - - | Normal
4 - - | Normal


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: SPU Power is Down

BTW, your profile shows:

I have assigned points to 25 of 243 responses to my questions



You should really read this:

http://forums11.itrc.hp.com/service/forums/helptips.do?#33




I guess people will stop posting to your question if you never come back to your threads - no response, no thank you, no points for most of your last threads!

Good luck!




Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!