cancel
Showing results for 
Search instead for 
Did you mean: 

TPM for HP servers

SOLVED
Go to solution

TPM for HP servers

Hi everyone,
I need to know TPM parameter for an rp7410 (750 MHz)and an rp3440 (1000 MHz
) in order to know how is the performance gap.
Btw, is there an internal website where to get these information?
Thanks in advance

 

 

 

P.S. this thread has been moevd from Servers > Planning to HP9000 - Hp forum Moderator

3 REPLIES
Pete Randall
Outstanding Contributor

Re: TPM for HP servers

Enrico,

I did a quick google search on "+rp7410 +tpm +site:itrc.hp.com" and came up with many, many hits. The same should be true for the rp3440, I would think. Keep in mind the answers will vary somewhat, depending on number of processors at the very least.


Pete


Pete
Duncan Edmonstone
Honored Contributor
Solution

Re: TPM for HP servers

Enrico,

If by internal website you mean a HP internal website then yes trhere is, but I'm not going to post it on a public forum (and if you are a HP employee you shouldn't really be asking for this data here).

If you're an HP employee send me an email and I'll help you out. I'm sure you can figure out my HP email address.

HTH

Duncan

HTH

Duncan
Dennis Handly
Acclaimed Contributor

Re: TPM for HP servers

You might want to look at this recent thread:

http://h30499.www3.hp.com/t5/Planning/TPC-Rating/m-p/4359509