Where to download firmware upgrade for rp5400

[Marshmellow]

Does anyone know where I can find this patch PF_CPREGSPA0112 please? It is for a GSP firmware upgrade. I have searched the site already but no luck.

thanks in advance.

[Robert-Jan Goossens_1]

Hi,

attaching the PF_CPREGSPA0112.tar.gz file. I dont know where the firmware database has been moved to.

Best regards,
Robert-Jan

[Torsten.]

The firmware has moved to

HP Business Support Center

Go to www.itrc.com -> firmware and drivers - 9000 servers

but it's incomplete, the revision A GSP firmware isn't there, only revision B firmware is - but you have rev A.


:-((

[Robert-Jan Goossens_1 · Accepted solution]

Ok found it.

ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CPREGSPA0112.txt

ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CPREGSPA0112.tar.gz

Regards,
Robert-Jan

[Marshmellow]

Thanks for all your replies...

I just have a slightly different problem in that the GSP won't accept the admin login and password. In fact I don't even get a chance to type in the password.

[Torsten.]

Do you connect serial or over LAN?

Normally, if other users are connected, you need to press CTRL and E at the same time, followed by c and f to gain write access after you are logged on. Make sure you are using the correct terminal settings.

In case of a "frozen" GSP, first check it:

# stty +queryGSP < /dev/GSPdiag1

If you get no response, reset it:

# stty +resetGSP < /dev/GSPdiag1

[Marshmellow]

Thank you all for your help. I have successfully configured the said GSP.

[Julian Dittrich]

Hi,

Where can I find the update now? The link is dead :(

Thank you very much in advance,

Julian

[Torsten.]

Isn't it attached in the first reply?

[Julian Dittrich]

Thank you. I realy overlook that one :(