HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

blinking 'attn' light on front panel

Richard Pierson
Occasional Contributor

blinking 'attn' light on front panel

Have two N class, both have flashing attention lights on the front panel. No hardware issues that I can find in the logs that have not been resolved, both have 3 power supplies and two of them, one on each server, came unplugged from the power strip in the cabinet from loose sockets.
How to I look at what those lights are reporting and how do I reset them.
4 REPLIES
Torsten.
Acclaimed Contributor

Re: blinking 'attn' light on front panel

The loose power cables are likely the reason for this.

Connect to GSP and review the system logs.

By reading them, the light will go off.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Richard Pierson
Occasional Contributor

Re: blinking 'attn' light on front panel

I tried the ctl b on the remote console and that does nothing. Been away from these too long.
Torsten.
Acclaimed Contributor

Re: blinking 'attn' light on front panel

How do you log on? Via telnet or something to the GSP? Then CTRL B would work.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Richard Pierson
Occasional Contributor

Re: blinking 'attn' light on front panel

I figured it out, setup a device and cu'd to it. was the PS unplugged that triggered it.
talk about cu'ing and the way back machine :-)