HPE Community
HPE 9000 and HPE e3000 Servers
1754014 Members
7656 Online
108811 Solutions
New Discussion юеВ

Re: fingerprint without operation system installed

 
gianluca consalvi
New Member

тАО05-13-2009 10:29 AM

тАО05-13-2009 10:29 AM

fingerprint without operation system installed

I have PA-RISC server rp7440. if operation system "HP-UX 11i" isn't installed into the server ,is possible see fingerprint?With MP is not possible?
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО05-13-2009 10:35 AM

тАО05-13-2009 10:35 AM

Re: fingerprint without operation system installed

fingerprint?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
gianluca consalvi
New Member

тАО05-13-2009 10:49 AM

тАО05-13-2009 10:49 AM

Re: fingerprint without operation system installed

yes, Fingerprint is server code, with the S.O. you use "getconf CS_PARTITION_IDENT" for see it but without what you use?
0 Kudos
Torsten.
Acclaimed Contributor

тАО05-13-2009 11:02 AM

тАО05-13-2009 11:02 AM

Re: fingerprint without operation system installed

Try

MP:CM> id

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.