HP 9000
cancel
Showing results for 
Search instead for 
Did you mean: 

how find single core or dual core processor

SOLVED
Go to solution
rajesh73
Super Advisor

how find single core or dual core processor

Hi

I have 9000/800/rp4440 PA-RISC server how to find single core or dual core procesoor in hp-ux
10 REPLIES
Johnson Punniyalingam
Honored Contributor
Solution

Re: how find single core or dual core processor

Torsten.
Acclaimed Contributor

Re: how find single core or dual core processor

You have either PA8800 or PA8900 processors - all are always dual core.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
rajesh73
Super Advisor

Re: how find single core or dual core processor

HI johnson

I run the below command

echo "selclass qualifier cpu;info;wait;infolog" | cstm > /tmp/cpuinfo

but how can i have find dual core or single core from the output
Torsten.
Acclaimed Contributor

Re: how find single core or dual core processor

You can see in the output 2 cpus are in the same slot.


However, you have dual cores!!!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Michal Kapalka (mikap)
Honored Contributor

Re: how find single core or dual core processor

hi,

if you have a MP/GSP access them go ==>

cm ==> df ==> you will get the FRU information for the CPU

example :

DF

To dump all available FRU information without any paging, use
the command line interface: DF -ALL -NC


Display FRU Information Menu:
S - Specific FRU
A - All available FRUs
V - Display Mode: Text

Enter menu item or [Q] to Quit: S
S

FRU IDs:
--------
0001-Mem Extender 0002-Power Converter 0003-Power Supply 0
0004-Power Supply 1 0005-Diagnostic Panel 0006-Front Panel
0007-Disk Management 0008-Disk Backplane 0010-Processor Board
0012-Power Pod 0 0032-CPU 0 PIROM 0036-Processor 0 RAM
0128-DIMM0A 0136-DIMM0B 0144-DIMM0C
0152-DIMM0D 0000-Motherboard

Select FRU ID: 0032
0032

FRU NAME: CPU 0 PIROM ID:20

PROCESSOR DATA
S-spec/QDF: 9.13B
Sample/Prod: 03

CORE DATA
Arch Revision : 127
Core Family : 240
Core Model : 88
Core Stepping : 50
Max Core Freqency : 1000 MHZ
Max SysBus Freqency : 200 MHZ
Core Voltage : 1300 mV
Core Voltage Tolerance,High : 65 mV
Core Voltage Tolerance,Low : 65 mV

CACHE DATA
Cache Size : 65536 KB

PACKAGE DATA
Package Revision : A3
Substrate Revision: 00

PROC PART NUMBER DATA
Part Number : PA8900
Electronic Signature : 05023FC429636045

THERMAL REF DATA
Upper Temp Ref : 113 C
Calibr Offset : 0 C

FEATURES DATA
IA-32 Proc Core Feature Flags: 00040040
IA-64 Proc Core Feature Flags: 0000000000000000
Package Feature Flags : 0000007F
Devices on TAP Chain : 1

mikap
rajesh73
Super Advisor

Re: how find single core or dual core processor

Hi michal

i am getting below messages from MP login

Core Stepping : 32

core stepping : 32 means dual core?
if it is 31 it is single core

pls reply very urgent

Regds
Rajesh

Enter menu item or [Q] to Quit: s
s

FRU IDs:
--------
0001-Mem Extender 0002-Power Converter 0003-Power Supply 0
0004-Power Supply 1 0005-Diagnostic Panel 0006-Front Panel
0010-Processor Board 0012-Power Pod 0 0013-Power Pod 1
0032-CPU 0 PIROM 0033-CPU 1 PIROM 0036-Processor 0 RAM
0037-Processor 1 RAM 0128-DIMM0A 0136-DIMM0B
0144-DIMM0C 0152-DIMM0D 0160-DIMM1A
0168-DIMM1B 0176-DIMM1C 0184-DIMM1D
0000-Motherboard

Select FRU ID: ^[



[vvc1dbv1mp] MP:CM> df


DF

To dump all available FRU information without any paging, use
the command line interface: DF -ALL -NC


Display FRU Information Menu:
S - Specific FRU
A - All available FRUs
V - Display Mode: Text

Enter menu item or [Q] to Quit: s
s

FRU IDs:
--------
0001-Mem Extender 0002-Power Converter 0003-Power Supply 0
0004-Power Supply 1 0005-Diagnostic Panel 0006-Front Panel
0010-Processor Board 0012-Power Pod 0 0013-Power Pod 1
0032-CPU 0 PIROM 0033-CPU 1 PIROM 0036-Processor 0 RAM
0037-Processor 1 RAM 0128-DIMM0A 0136-DIMM0B
0144-DIMM0C 0152-DIMM0D 0160-DIMM1A
0168-DIMM1B 0176-DIMM1C 0184-DIMM1D
0000-Motherboard

Select FRU ID: 0032
0032

FRU NAME: CPU 0 PIROM ID:20

PROCESSOR DATA
S-spec/QDF: 9.5 Bâ ¥
Sample/Prod: 03

CORE DATA
Arch Revision : 7F
Core Family : F0
Core Model : 58
Core Stepping : 32
Max Core Freqency : E803 MHZ
Max SysBus Freqency : C800 MHZ
Core Voltage : 1405 mV
Core Voltage Tolerance,High : 41 mV
Core Voltage Tolerance,Low : 41 mV

CACHE DATA
Cache Size : 080 Kb

PACKAGE DATA
Package Revision : A3
Substrate Revision: 00

PROC PART NUMBER DATA
Part Number : PA8800
Electronic Signature : 44405554043F0405

THERMAL REF DATA
Upper Temp Ref : 113 C
Calibr Offset : 0 C

FEATURES DATA
IA-32 Proc Core Feature Flags: 00040040
IA-64 Proc Core Feature Flags: 0000000000000000
Package Feature Flags : 0000007F
Devices on TAP Chain : 1

FRU IDs:
--------
0001-Mem Extender 0002-Power Converter 0003-Power Supply 0
0004-Power Supply 1 0005-Diagnostic Panel 0006-Front Panel
0010-Processor Board 0012-Power Pod 0 0013-Power Pod 1
0032-CPU 0 PIROM 0033-CPU 1 PIROM 0036-Processor 0 RAM
0037-Processor 1 RAM 0128-DIMM0A 0136-DIMM0B
0144-DIMM0C 0152-DIMM0D 0160-DIMM1A
0168-DIMM1B 0176-DIMM1C 0184-DIMM1D
0000-Motherboard

Select FRU ID:

Michal Kapalka (mikap)
Honored Contributor

Re: how find single core or dual core processor

hi,

check this link :

http://www.lostcircuits.com/mambo//index.php?option=com_content&task=view&id=42&Itemid=42

you will find there a information about your CPU.

# HP PA-8800 dual core RISC processor

mikap
rajesh73
Super Advisor

Re: how find single core or dual core processor

hi

ok i understand but i have lot of servers how to check through command line output

Regds
rajesh
Michal Kapalka (mikap)
Honored Contributor

Re: how find single core or dual core processor

if you know the type of cpu PA-xxxx them it is possible.

mikap
Torsten.
Acclaimed Contributor

Re: how find single core or dual core processor

Example of STM output from a similar system:

...
------------ I/O Module Error Log Information ------------

No IO subsystem errors recorded

FRU INFORMATION

Module Revision
------ --------
PA 8900 CPU Module 3.2
PA 8900 CPU Module 3.2
PA 8900 CPU Module 3.2
PA 8900 CPU Module 3.2
...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!